linuxopjemac wrote:
I don't see your wireless card here...
Can you give me the output of:
Code:
lsmod
and
Code:
lsusb
and
Code:
dmesg
please?
______________________________________
( Hell is empty and all the devils are )
( here. )
( )
( -- Wm. Shakespeare, "The Tempest" )
--------------------------------------
o
o
.--.
|o_o |
|:_/ |
// \ \
(| | )
/'\_ _/`\
\___)=(___/
jimwg@icebook
~ $ lsmod
Module Size Used by
radeon 692092 0
ttm 46748 1 radeon
drm_kms_helper 24325 1 radeon
drm 142475 3 radeon,ttm,drm_kms_helper
uinput 10355 2
cpufreq_ondemand 10789 0
cpufreq_conservative 8952 0
cpufreq_userspace 5156 0
cpufreq_stats 5840 0
cpufreq_powersave 4138 0
parport_pc 28780 0
lp 10975 0
parport 32295 2 parport_pc,lp
sco 11560 2
bnep 13750 2
rfcomm 37794 0
l2cap 32868 4 bnep,rfcomm
crc16 4475 1 l2cap
bluetooth 52362 6 sco,bnep,rfcomm,l2cap
nfsd 243892 11
lockd 65427 1 nfsd
nfs_acl 5635 1 nfsd
auth_rpcgss 36656 1 nfsd
sunrpc 173447 10 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 6642 1 nfsd
binfmt_misc 10371 1
fuse 57741 1
iptable_nat 8155 0
nf_nat 16339 1 iptable_nat
nf_conntrack_ipv4 13417 3 iptable_nat,nf_nat
nf_conntrack 52969 3 iptable_nat,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4 4391 1 nf_conntrack_ipv4
iptable_mangle 6113 0
iptable_filter 5502 0
ip_tables 13570 3 iptable_nat,iptable_mangle,iptable_filter
x_tables 14599 2 iptable_nat,ip_tables
pmu_battery 4706 0
power_supply 10795 1 pmu_battery
snd_powermac 57659 1
firewire_sbp2 16011 0
scsi_mod 126838 1 firewire_sbp2
loop 15945 0
snd_aoa_i2sbus 20629 0
snd_pcm_oss 42143 0
snd_mixer_oss 19030 1 snd_pcm_oss
snd_pcm 65033 3 snd_powermac,snd_aoa_i2sbus,snd_pcm_oss
snd_page_alloc 9045 1 snd_pcm
snd_seq_midi 8216 0
snd_rawmidi 21199 1 snd_seq_midi
snd_seq_midi_event 7956 1 snd_seq_midi
snd_seq 51409 2 snd_seq_midi,snd_seq_midi_event
snd_timer 20956 2 snd_pcm,snd_seq
snd_seq_device 8405 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 52643 11 snd_powermac,snd_aoa_i2sbus,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 8003 1 snd
evdev 11760 31
airport 6597 0
orinoco 61191 1 airport
cfg80211 117489 1 orinoco
rfkill 17994 3 bluetooth,cfg80211
snd_aoa_soundbus 6669 1 snd_aoa_i2sbus
ext3 124692 2
jbd 40847 1 ext3
mbcache 8286 1 ext3
usbhid 39928 0
hid 68185 1 usbhid
ohci_hcd 35272 0
ehci_hcd 42854 0
firewire_ohci 25992 0
ide_cd_mod 28561 0
sungem 30865 0
firewire_core 44186 2 firewire_sbp2,firewire_ohci
cdrom 36699 1 ide_cd_mod
sungem_phy 12982 1 sungem
crc_itu_t 4495 1 firewire_core
usbcore 131839 4 usbhid,ohci_hcd,ehci_hcd
nls_base 8693 1 usbcore
i2c_powermac 6651 0
jimwg@icebook
~ $ lsusb
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 047d:104b Kensington
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
jimwg@icebook
~ $ dmesg
[ 0.000000] Using PowerMac machine description
[ 0.000000] Total memory = 640MB; using 2048kB for hash table (at cfe00000)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-powerpc (Debian 2.6.32-23) (
dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-3) ) #1 Sat Sep 18 02:18:04 UTC 2010
[ 0.000000] Found initrd at 0xc1b00000:0xc246b000
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xc0
[ 0.000000] Mapped at 0xff7c0000
[ 0.000000] Found a Pangea mac-io controller, rev: 0, mapped at 0xff740000
[ 0.000000] Processor NAP mode on idle enabled.
[ 0.000000] PowerMac motherboard: iBook 2 rev. 2
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f4000000 ranges:
[ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=1538, gen1=1537
[ 0.000000] nvram: Active bank is: 0
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x28000000, Total RAM: 0x28000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00028000
[ 0.000000] Normal 0x00028000 -> 0x00028000
[ 0.000000] HighMem 0x00028000 -> 0x00028000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00028000
[ 0.000000] On node 0 totalpages: 163840
[ 0.000000] free_area_init_node: node 0, pgdat c0504308, node_mem_map c0599000
[ 0.000000] DMA zone: 1280 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 162560 pages, LIFO batch:31
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 162560
[ 0.000000] Kernel command line: root=/dev/hda14 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] High memory: 0k
[ 0.000000] Memory: 631424k/655360k available (4924k kernel code, 23536k reserved, 276k data, 478k bss, 232k init)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffef000..0xfffff000 : fixmap
[ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs
[ 0.000000] * 0xfde72000..0xff800000 : early ioremap
[ 0.000000] * 0xe9000000..0xfde72000 : vmalloc & ioremap
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:512
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] irq: irq 55 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 55
[ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off
[ 0.000000] time_init: decrementer frequency = 24.835245 MHz
[ 0.000000] time_init: processor frequency = 900.000000 MHz
[ 0.000000] clocksource: timebase mult[a10fb9b] shift[22] registered
[ 0.000000] clockevent: decrementer mult[65b9a45] shift[32] cpu[0]
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.000000] irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22
[ 0.000000] irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23
[ 0.001804] Security Framework initialized
[ 0.001838] SELinux: Disabled at boot.
[ 0.001859] Mount-cache hash table entries: 512
[ 0.002369] device-tree: Duplicate name in /cpus/PowerPC,750@0, renamed to "l2-cache#1"
[ 0.003463] device-tree: Duplicate name in /pci@f2000000/mac-io@17/gpio@50, renamed to "extint-gpio4@5c#1"
[ 0.004514] Initializing cgroup subsys ns
[ 0.004576] Initializing cgroup subsys cpuacct
[ 0.004587] Initializing cgroup subsys devices
[ 0.004597] Initializing cgroup subsys freezer
[ 0.004607] Initializing cgroup subsys net_cls
[ 0.006065] devtmpfs: initialized
[ 0.006944] regulator: core version 0.5
[ 0.007148] NET: Registered protocol family 16
[ 0.007993] irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42
[ 0.008054] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.008071] channel 0 bus <multibus>
[ 0.008079] channel 1 bus <multibus>
[ 0.008119] irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26
[ 0.008141] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.008154] channel 0 bus <multibus>
[ 0.008173] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 0.008185] channel 1 bus <multibus>
[ 0.008193] channel 2 bus <multibus>
[ 0.008251] irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25
[ 0.008279] irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47
[ 0.008430] PCI: Probing PCI hardware
[ 0.008733] pci 0000:00:10.0: reg 10 32bit mmio pref: [0x98000000-0x9fffffff]
[ 0.008743] pci 0000:00:10.0: reg 14 io port: [0x400-0x4ff]
[ 0.008752] pci 0000:00:10.0: reg 18 32bit mmio: [0x90000000-0x9000ffff]
[ 0.008770] pci 0000:00:10.0: reg 30 32bit mmio pref: [0x90020000-0x9003ffff]
[ 0.008795] pci 0000:00:10.0: supports D1 D2
[ 0.008854] irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48
[ 0.009141] pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff]
[ 0.009213] pci 0001:10:18.0: reg 10 32bit mmio: [0x80081000-0x80081fff]
[ 0.009256] pci 0001:10:18.0: supports D1 D2
[ 0.009262] pci 0001:10:18.0: PME# supported from D1 D2 D3hot
[ 0.009281] pci 0001:10:18.0: PME# disabled
[ 0.009335] pci 0001:10:19.0: reg 10 32bit mmio: [0x80080000-0x80080fff]
[ 0.009377] pci 0001:10:19.0: supports D1 D2
[ 0.009382] pci 0001:10:19.0: PME# supported from D1 D2 D3hot
[ 0.009396] pci 0001:10:19.0: PME# disabled
[ 0.009448] irq: irq 27 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27
[ 0.009472] irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28
[ 0.009815] pci 0002:20:0e.0: reg 10 32bit mmio: [0xf5000000-0xf5000fff]
[ 0.009848] pci 0002:20:0e.0: supports D1 D2
[ 0.009854] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.009869] pci 0002:20:0e.0: PME# disabled
[ 0.009910] pci 0002:20:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff]
[ 0.009932] pci 0002:20:0f.0: reg 30 32bit mmio pref: [0xf5100000-0xf51fffff]
[ 0.009984] irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40
[ 0.010006] irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41
[ 0.010233] PCI 0000:00 Cannot reserve Legacy IO [0x802000-0x802fff]
[ 0.010252] pci_bus 0000:00: resource 0 io: [0x802000-0x1001fff]
[ 0.010259] pci_bus 0000:00: resource 1 mem: [0xf1000000-0xf1ffffff]
[ 0.010265] pci_bus 0000:00: resource 2 mem: [0x90000000-0x9fffffff]
[ 0.010273] pci_bus 0001:10: resource 0 io: [0x00-0x7fffff]
[ 0.010280] pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff]
[ 0.010286] pci_bus 0001:10: resource 2 mem: [0x80000000-0x8fffffff]
[ 0.010294] pci_bus 0002:20: resource 0 io: [0xff7fe000-0xffffdfff]
[ 0.010300] pci_bus 0002:20: resource 1 mem: [0xf5000000-0xf5ffffff]
[ 0.013434] bio: create slab <bio-0> at 0
[ 0.013785] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none
[ 0.013813] vgaarb: loaded
[ 0.014169] Switching to clocksource timebase
[ 0.018442] NET: Registered protocol family 2
[ 0.018685] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.020146] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.027252] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.029055] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.029073] TCP reno registered
[ 0.029503] NET: Registered protocol family 1
[ 0.029847] Unpacking initramfs...
[ 0.662703] Freeing initrd memory: 9644k freed
[ 0.664198] Thermal assist unit using timers, shrink_timer: 500 jiffies
[ 0.664687] Registering PowerMac CPU frequency driver
[ 0.664705] Low: 400 Mhz, High: 900 Mhz, Boot: 900 Mhz
[ 0.665164] audit: initializing netlink socket (disabled)
[ 0.665231] type=2000 audit(1287227835.660:1): initialized
[ 0.674604] VFS: Disk quotas dquot_6.5.2
[ 0.674825] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.674946] msgmni has been set to 1252
[ 0.675626] alg: No test for stdrng (krng)
[ 0.675743] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.675765] io scheduler noop registered
[ 0.675775] io scheduler anticipatory registered
[ 0.675787] io scheduler deadline registered
[ 0.675897] io scheduler cfq registered (default)
[ 0.676308] radeonfb 0000:00:10.0: enabling device (0086 -> 0087)
[ 0.870098] radeonfb 0000:00:10.0: Invalid ROM contents
[ 0.870117] radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55
[ 0.870129] radeonfb: Retrieved PLL infos from Open Firmware
[ 0.870145] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=180.00 Mhz, System=180.00 MHz
[ 0.870163] radeonfb: PLL min 12000 max 35000
[ 0.967233] i2c i2c-2: unable to read EDID block.
[ 1.119222] i2c i2c-2: unable to read EDID block.
[ 1.271221] i2c i2c-2: unable to read EDID block.
[ 1.423221] i2c i2c-3: unable to read EDID block.
[ 1.575221] i2c i2c-3: unable to read EDID block.
[ 1.727222] i2c i2c-3: unable to read EDID block.
[ 1.783180] radeonfb: Monitor 1 type LCD found
[ 1.783191] radeonfb: EDID probed
[ 1.783200] radeonfb: Monitor 2 type no found
[ 1.783228] radeonfb: Using Firmware dividers 0x000600ad from PPLL 0
[ 1.942196] radeonfb: Dynamic Clock Power Management enabled
[ 1.970040] Console: switching to colour frame buffer device 128x48
[ 1.984518] radeonfb: Backlight initialized (radeonbl0)
[ 1.984692] radeonfb (0000:00:10.0): ATI Radeon 4c57 "LW"
[ 1.988585] Generic non-volatile memory driver v1.1
[ 1.988817] Linux agpgart interface v0.103
[ 1.988998] agpgart-uninorth 0000:00:0b.0: Apple UniNorth/Pangea chipset
[ 1.991781] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
[ 1.992081] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
[ 1.992377] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.992993] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 1.993254] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
[ 1.993568] ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
[ 1.993889] Serial: MPC52xx PSC UART driver
[ 1.994132] MacIO PCI driver attached to Pangea chipset
[ 1.994763] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32
[ 1.995008] irq: irq 19 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19
[ 1.995026] irq: irq 11 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16
[ 1.995104] irq: irq 57 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 57
[ 1.995188] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17
[ 1.995205] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18
[ 1.995338] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20
[ 1.995354] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21
[ 1.995720] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.996325] Uniform Multi-Platform E-IDE driver
[ 1.996884] adb: starting probe task...
[ 2.247693] adb devices: [2]: 2 c3 [3]: 3 1 [7]: 7 1f
[ 2.254415] ADB keyboard at 2, handler 1
[ 2.254565] Detected ADB keyboard, type ANSI.
[ 2.260109] input: ADB keyboard as /devices/virtual/input/input1
[ 2.265682] input: ADB Powerbook buttons as /devices/virtual/input/input2
[ 2.285937] ADB mouse at 3, handler set to 4 (trackpad)
[ 2.350848] input: ADB mouse as /devices/virtual/input/input3
[ 2.356230] adb: finished probe task...
[ 3.014204] ide-pmac: Found Apple KeyLargo ATA-4 controller (macio), bus ID 2, irq 19
[ 3.019923] Probing IDE interface ide0...
[ 3.602514] hda: FUJITSU MHS2040AT D, ATA DISK drive
[ 4.110198] hdb: TOSHIBA DVD-ROM SD-R2412, ATAPI CD/DVD-ROM drive
[ 4.116086] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.152205] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33
[ 4.158132] hda: UDMA/33 mode selected
[ 4.200712] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.200765] hdb: MWDMA2 mode selected
[ 4.206690] ide0 at 0xe902e000-0xe902e070,0xe902e160 on irq 19
[ 4.212754] ide-gd driver 1.18
[ 4.218564] hda: max request size: 512KiB
[ 4.606326] hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=16383/255/63
[ 4.612883] hda: cache flushes supported
[ 4.619091] hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 hda16 hda17
[ 4.635110] mice: PS/2 mouse device common for all mice
[ 4.642021] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 4.649770] TCP cubic registered
[ 4.657027] NET: Registered protocol family 10
[ 4.665019] lo: Disabled Privacy Extensions
[ 4.672619] Mobile IPv6
[ 4.679503] NET: Registered protocol family 17
[ 4.686686] PM: Resume from disk failed.
[ 4.686733] registered taskstats version 1
[ 4.693975] input: PMU as /devices/virtual/input/input4
[ 4.700935] Registered led device: pmu-led::front
[ 4.707978] rtc-generic rtc-generic: setting system clock to 2010-10-16 11:17:20 UTC (1287227840)
[ 4.715052] Initalizing network drop monitor service
[ 4.722148] Freeing unused kernel memory: 232k init
[ 4.818466] udev: starting version 161
[ 5.102943] PowerMac i2c bus pmu 2 registered
[ 5.201765] PowerMac i2c bus pmu 1 registered
[ 5.233702] PowerMac i2c bus mac-io 0 registered
[ 5.241263] PowerMac i2c bus uni-n 1 registered
[ 5.285431] PowerMac i2c bus uni-n 0 registered
[ 5.312316] usbcore: registered new interface driver usbfs
[ 5.331601] usbcore: registered new interface driver hub
[ 5.348989] usbcore: registered new device driver usb
[ 5.370937] sungem.c:v0.98 8/24/03 David S. Miller (
davem@redhat.com)
[ 5.414534] ide-cd driver 5.00
[ 5.455339] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.463052] PHY ID: 4061e4, addr: 0
[ 5.465252] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:7e:75:14
[ 5.471972] eth0: Found BCM5221 PHY
[ 5.481009] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.488958] ohci_hcd 0001:10:18.0: enabling device (0000 -> 0002)
[ 5.503089] ohci_hcd 0001:10:18.0: OHCI Host Controller
[ 5.510027] ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1
[ 5.517159] ide-cd: hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
[ 5.523804] Uniform CD-ROM driver Revision: 3.20
[ 5.568915] ohci_hcd 0001:10:18.0: irq 27, io mem 0x80081000
[ 5.582478] firewire_ohci: Added fw-ohci device 0002:20:0e.0, OHCI version 1.0
[ 5.655211] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.661926] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.668443] usb usb1: Product: OHCI Host Controller
[ 5.674946] usb usb1: Manufacturer: Linux 2.6.32-5-powerpc ohci_hcd
[ 5.681481] usb usb1: SerialNumber: 0001:10:18.0
[ 5.689460] usb usb1: configuration #1 chosen from 1 choice
[ 5.696773] hub 1-0:1.0: USB hub found
[ 5.703038] hub 1-0:1.0: 2 ports detected
[ 5.709649] ohci_hcd 0001:10:19.0: enabling device (0000 -> 0002)
[ 5.715794] ohci_hcd 0001:10:19.0: OHCI Host Controller
[ 5.724958] ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2
[ 5.731375] ohci_hcd 0001:10:19.0: irq 28, io mem 0x80080000
[ 5.810515] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.816794] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.822936] usb usb2: Product: OHCI Host Controller
[ 5.829018] usb usb2: Manufacturer: Linux 2.6.32-5-powerpc ohci_hcd
[ 5.835151] usb usb2: SerialNumber: 0001:10:19.0
[ 5.842413] usb usb2: configuration #1 chosen from 1 choice
[ 5.848859] hub 2-0:1.0: USB hub found
[ 5.854892] hub 2-0:1.0: 2 ports detected
[ 6.082550] firewire_core: created device fw0: GUID 000a95fffe7e7514, S400
[ 6.090059] usb 1-1: new low speed USB device using ohci_hcd and address 2
[ 6.302485] usb 1-1: New USB device found, idVendor=047d, idProduct=104b
[ 6.308815] usb 1-1: New USB device strings: Mfr=0, Product=3, SerialNumber=0
[ 6.315026] usb 1-1: Product: Kensington Ci95m Wireless Mouse with Nano Receiver
[ 6.323693] usb 1-1: configuration #1 chosen from 1 choice
[ 6.384543] usbcore: registered new interface driver hiddev
[ 6.398070] input: Kensington Ci95m Wireless Mouse with Nano Receiver as /devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1:1.0/input/input5
[ 6.412449] generic-usb 0003:047D:104B.0001: input,hidraw0: USB HID v1.11 Mouse [Kensington Ci95m Wireless Mouse with Nano Receiver] on usb-0001:10:18.0-1/input0
[ 6.427381] usbcore: registered new interface driver usbhid
[ 6.436001] usbhid: v2.6:USB HID core driver
[ 7.227063] PM: Starting manual resume from disk
[ 7.234563] PM: Resume from partition 3:9
[ 7.234567] PM: Checking hibernation image.
[ 7.256434] PM: Error -22 checking image file
[ 7.256439] PM: Resume from disk failed.
[ 7.356832] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 7.364400] EXT3-fs: write access will be enabled during recovery.
[ 8.640112] kjournald starting. Commit interval 5 seconds
[ 8.647698] EXT3-fs: recovery complete.
[ 8.655659] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.852041] udev: starting version 161
[ 13.050912] cfg80211: Using static regulatory domain info
[ 13.058823] cfg80211: Regulatory domain: US
[ 13.066609] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.074566] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 13.082477] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 13.090318] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 13.098029] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 13.105634] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 13.113147] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 13.128376] cfg80211: Calling CRDA for country: US
[ 13.238276] orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 13.283181] airport 0.15 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 13.283289] airport: Physical address 80030000
[ 14.486906] airport 0.00030000:radio: Hardware identity 0005:0001:0001:0002
[ 14.494775] airport 0.00030000:radio: Station identity 001f:0001:0008:0046
[ 14.502291] airport 0.00030000:radio: Firmware determined as Lucent/Agere 8.70
[ 14.510533] airport 0.00030000:radio: firmware: requesting agere_sta_fw.bin
[ 14.607495] airport 0.00030000:radio: firmware: requesting agere_sta_fw.bin
[ 14.634043] airport 0.00030000:radio: Cannot find firmware agere_sta_fw.bin
[ 14.641552] airport 0.00030000:radio: Hardware identity 0005:0001:0001:0002
[ 14.648890] airport 0.00030000:radio: Station identity 001f:0001:0008:0046
[ 14.656008] airport 0.00030000:radio: Firmware determined as Lucent/Agere 8.70
[ 14.662923] airport 0.00030000:radio: Ad-hoc demo mode supported
[ 14.669580] airport 0.00030000:radio: IEEE standard IBSS ad-hoc mode supported
[ 14.676045] airport 0.00030000:radio: WEP supported, 104-bit key
[ 18.369959] Adding 130040k swap on /dev/hda9. Priority:-1 extents:1 across:130040k
[ 18.640049] EXT3 FS on hda14, internal journal
[ 18.970724] loop: module loaded
[ 19.212543] SCSI subsystem initialized
[ 19.309160] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24
[ 19.309220] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29
[ 19.484272] irq: irq 58 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 58
[ 19.900922] input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input6
[ 21.468811] kjournald starting. Commit interval 5 seconds
[ 21.475618] EXT3 FS on hda11, internal journal
[ 21.484108] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.278001] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 23.580026] nf_conntrack version 0.5.0 (10026 buckets, 40104 max)
[ 23.590787] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 23.597735] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 23.604613] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 24.134006] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.946010] fuse init (API version 7.13)
[ 26.902958] RPC: Registered udp transport module.
[ 26.904077] RPC: Registered tcp transport module.
[ 26.905075] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 27.373452] Installing knfsd (copyright (C) 1996
okir@monad.swb.de).
[ 27.611008] svc: failed to register lockdv1 RPC service (errno 97).
[ 27.617438] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 27.650394] NFSD: starting 90-second grace period
[ 30.645333] Bluetooth: Core ver 2.15
[ 30.646969] NET: Registered protocol family 31
[ 30.648029] Bluetooth: HCI device and connection manager initialized
[ 30.649033] Bluetooth: HCI socket layer initialized
[ 30.909496] Bluetooth: L2CAP ver 2.14
[ 30.910622] Bluetooth: L2CAP socket layer initialized
[ 30.954050] Bluetooth: RFCOMM TTY layer initialized
[ 30.955764] Bluetooth: RFCOMM socket layer initialized
[ 30.956780] Bluetooth: RFCOMM ver 1.11
[ 31.084916] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 31.086003] Bluetooth: BNEP filters: protocol multicast
[ 31.193322] Bluetooth: SCO (Voice Link) ver 0.6
[ 31.194400] Bluetooth: SCO socket layer initialized
[ 32.559560] lp: driver loaded but no devices found
[ 38.307185] ondemand governor failed, too long transition latency of HW, fallback to performance governor
[ 39.467985] radeonfb 0000:00:10.0: Invalid ROM contents
[ 39.468181] radeonfb 0000:00:10.0: Invalid ROM contents
[ 39.798852] [drm] Initialized drm 1.1.0 20060810
[ 40.444137] [drm] radeon kernel modesetting enabled.
[ 40.566795] input: Mouseemu virtual keyboard as /devices/virtual/input/input7
[ 40.569797] input: Mouseemu virtual mouse as /devices/virtual/input/input8
[ 53.727413] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 54.255272] radeonfb 0000:00:10.0: Invalid ROM contents
[ 54.256148] radeonfb 0000:00:10.0: Invalid ROM contents
[ 55.588002] eth1: New link status: Connected (0001)
[ 55.588935] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 66.294391] eth1: no IPv6 routers present
[ 140.282507] eth1: New link status: AP Out of Range (0004)
[ 140.385726] eth1: New link status: AP In Range (0005)
[ 142.550549] eth1: New link status: AP Out of Range (0004)
[ 142.721768] eth1: New link status: AP In Range (0005)
[ 144.992674] eth1: New link status: AP Out of Range (0004)
[ 145.092774] eth1: New link status: AP In Range (0005)
[ 174.485048] eth1: New link status: AP Out of Range (0004)
[ 195.355450] eth1: New link status: AP In Range (0005)
[ 203.157403] eth1: New link status: AP Out of Range (0004)
[ 203.248322] eth1: New link status: AP In Range (0005)
[ 209.198986] eth1: New link status: AP Out of Range (0004)
[ 209.292969] eth1: New link status: AP In Range (0005)
[ 211.444538] eth1: New link status: AP Out of Range (0004)
[ 211.529725] eth1: New link status: AP In Range (0005)
[ 213.681122] eth1: New link status: AP Out of Range (0004)
[ 213.771334] eth1: New link status: AP In Range (0005)
[ 215.921870] eth1: New link status: AP Out of Range (0004)
[ 216.009033] eth1: New link status: AP In Range (0005)
[ 218.158493] eth1: New link status: AP Out of Range (0004)
[ 218.252851] eth1: New link status: AP In Range (0005)
[ 220.407414] eth1: New link status: AP Out of Range (0004)
[ 220.505825] eth1: New link status: AP In Range (0005)
[ 222.715170] eth1: New link status: AP Out of Range (0004)
[ 222.867552] eth1: New link status: AP In Range (0005)
[ 225.018132] eth1: New link status: AP Out of Range (0004)
[ 225.113519] eth1: New link status: AP In Range (0005)
[ 227.268097] eth1: New link status: AP Out of Range (0004)
[ 227.366514] eth1: New link status: AP In Range (0005)
[ 229.524190] eth1: New link status: AP Out of Range (0004)
[ 239.979526] eth1: New link status: AP In Range (0005)
[ 242.131058] eth1: New link status: AP Out of Range (0004)
[ 242.215132] eth1: New link status: AP In Range (0005)
[ 244.367745] eth1: New link status: AP Out of Range (0004)
[ 254.806649] eth1: New link status: AP In Range (0005)
[ 256.958172] eth1: New link status: AP Out of Range (0004)
[ 257.054506] eth1: New link status: AP In Range (0005)
[ 259.207084] eth1: New link status: AP Out of Range (0004)
[ 259.294202] eth1: New link status: AP In Range (0005)
[ 261.440582] eth1: New link status: AP Out of Range (0004)
[ 261.528762] eth1: New link status: AP In Range (0005)
[ 263.684402] eth1: New link status: AP Out of Range (0004)
[ 263.780785] eth1: New link status: AP In Range (0005)
[ 265.939523] eth1: New link status: AP Out of Range (0004)
[ 266.032803] eth1: New link status: AP In Range (0005)
[ 268.192538] eth1: New link status: AP Out of Range (0004)
[ 268.285824] eth1: New link status: AP In Range (0005)
[ 270.440370] eth1: New link status: AP Out of Range (0004)
[ 270.530614] eth1: New link status: AP In Range (0005)
[ 272.682167] eth1: New link status: AP Out of Range (0004)
[ 272.766223] eth1: New link status: AP In Range (0005)
[ 274.912626] eth1: New link status: AP Out of Range (0004)
[ 274.999744] eth1: New link status: AP In Range (0005)
[ 277.192693] eth1: New link status: AP Out of Range (0004)
[ 277.286684] eth1: New link status: AP In Range (0005)
[ 279.454710] eth1: New link status: AP Out of Range (0004)
[ 279.541848] eth1: New link status: AP In Range (0005)
[ 281.692394] eth1: New link status: AP Out of Range (0004)
[ 281.776445] eth1: New link status: AP In Range (0005)
[ 283.921814] eth1: New link status: AP Out of Range (0004)
[ 284.008944] eth1: New link status: AP In Range (0005)
[ 286.154322] eth1: New link status: AP Out of Range (0004)
[ 286.255799] eth1: New link status: AP In Range (0005)
[ 288.457974] eth1: New link status: AP Out of Range (0004)
[ 288.551934] eth1: New link status: AP In Range (0005)
[ 290.705512] eth1: New link status: AP Out of Range (0004)
[ 290.805991] eth1: New link status: AP In Range (0005)
[ 292.968765] eth1: New link status: AP Out of Range (0004)
[ 293.059022] eth1: New link status: AP In Range (0005)
[ 295.210575] eth1: New link status: AP Out of Range (0004)
[ 295.294612] eth1: New link status: AP In Range (0005)
[ 297.464623] eth1: New link status: AP Out of Range (0004)
[ 297.560984] eth1: New link status: AP In Range (0005)
[ 299.715638] eth1: New link status: AP Out of Range (0004)
[ 299.799673] eth1: New link status: AP In Range (0005)
[ 302.076644] eth1: New link status: AP Out of Range (0004)
[ 302.170614] eth1: New link status: AP In Range (0005)
[ 304.327292] eth1: New link status: AP Out of Range (0004)
[ 304.411361] eth1: New link status: AP In Range (0005)
[ 306.590538] eth1: New link status: AP Out of Range (0004)
[ 306.726871] eth1: New link status: AP In Range (0005)
[ 308.878432] eth1: New link status: AP Out of Range (0004)
[ 319.320481] eth1: New link status: AP In Range (0005)
[ 322.454407] eth1: New link status: AP Out of Range (0004)
[ 323.563283] eth1: New link status: AP In Range (0005)
[ 325.833957] eth1: New link status: AP Out of Range (0004)
[ 325.931011] eth1: New link status: AP In Range (0005)
[ 328.081531] eth1: New link status: AP Out of Range (0004)
[ 328.165590] eth1: New link status: AP In Range (0005)
[ 330.441557] eth1: New link status: AP Out of Range (0004)
[ 334.622580] eth1: New link status: AP In Range (0005)
[ 340.784231] eth1: New link status: AP Out of Range (0004)
[ 342.814665] eth1: New link status: AP In Range (0005)
[ 344.974196] eth1: New link status: AP Out of Range (0004)
[ 348.446791] eth1: New link status: AP In Range (0005)
[ 350.716853] eth1: New link status: AP Out of Range (0004)
[ 357.048449] eth1: New link status: AP In Range (0005)
[ 359.727977] eth1: New link status: AP Out of Range (0004)
[ 359.812743] eth1: New link status: AP In Range (0005)
[ 361.971437] eth1: New link status: AP Out of Range (0004)
[ 362.058550] eth1: New link status: AP In Range (0005)
[ 364.210078] eth1: New link status: AP Out of Range (0004)
[ 364.312601] eth1: New link status: AP In Range (0005)
[ 367.511134] eth1: New link status: AP Out of Range (0004)
[ 367.694280] eth1: New link status: AP In Range (0005)
[ 371.299697] eth1: New link status: AP Out of Range (0004)
[ 371.445986] eth1: New link status: AP In Range (0005)
[ 373.597485] eth1: New link status: AP Out of Range (0004)
[ 389.100095] eth1: New link status: AP In Range (0005)
[ 536.557823] eth1: New link status: AP Out of Range (0004)
[ 536.666818] eth1: New link status: AP In Range (0005)
[ 964.799779] eth1: New link status: AP Out of Range (0004)
[ 964.892350] eth1: New link status: AP In Range (0005)
[ 1335.901856] eth1: New link status: AP Out of Range (0004)
[ 1335.995383] eth1: New link status: AP In Range (0005)
[ 1849.751254] eth1: New link status: AP Out of Range (0004)
[ 1849.836709] eth1: New link status: AP In Range (0005)
[ 2094.060525] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 2094.271452] eth1: New link status: Connected (0001)
[ 2094.272371] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 2094.288741] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2095.040293] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 2095.195343] eth1: New link status: Connected (0001)
[ 2095.196246] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 2097.461155] eth1: New link status: Disconnected (0002)
[ 2097.571821] eth1: Lucent/Agere firmware doesn't support manual roaming
[ 2097.971763] eth1: New link status: Connected (0001)
[ 2105.870053] eth1: no IPv6 routers present
[ 2120.023651] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 2123.109931] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 2123.192840] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 2123.336265] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2123.924763] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 2124.070355] eth1: New link status: Connected (0001)
[ 2124.071252] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 2126.095483] eth1: New link status: Disconnected (0002)
[ 2126.203504] eth1: Lucent/Agere firmware doesn't support manual roaming
[ 2126.837843] eth1: New link status: Connected (0001)
[ 2134.450267] eth1: no IPv6 routers present
jimwg@icebook
~ $
Phew! There you go!
Thanks!
Jim in NYC
hyenas
